CB TOTAL RELEASE 
PCO Fogger WITH NYLAR & ETOC®
Exclusive Technologically Advanced Insect Growth Regulator With Knockdown Agents to Control Fleas, Ticks, Roaches and Their Eggs!
Introducing New CB Total Release PCO Fogger with Nylar and ETOC, the latest weapons in the war on Fleas, Ticks, and Roaches! Only CB offers the PCO this fearsome new combination of active ingredients that controls adult insects and their eggs simultaneously in a single treatment application.

Controls Fleas & Ticks For 7 Months-
Controls Cockroaches For 6 Months!

New CB Total Release PCO Fogger contains two new state-of-the-art molecules:

NYLAR: A revolutionary new Insect Growth Regulator that arrests the development of pre-adult insects, preventing reproduction and ending exsiting pest populations. Nylar is more economical and more environmentally responsible than ordinary IGRs because less is required to acheive the same results. Nylar keeps working for months after application - inhibiting the reproductive cycle of Fleas and Ticks for up to seven months and the reproductive cycle of Cockroaches for up to six months!

ETOC: A new synthetic pyrethrin with knockdown and killing properties of natural pyrethrins that controls the adult population. New ETOC is more economical and possesses performance characteristic superior to that of natural pyrethrins in today's environmental fogger formulations.

Target Insects:
Use CB Total release PCO Fogger with Nylar and ETOC to control adult and Pre-adult Cockroaches and Fleas, Ants, Houseflies, Mosquitoes, Small Flying Moths, Crickets, Ticks, Spiders and more. See label for complete listing.

Use Areas:
Use in and around the home, household storage areas, pet sleeping areas and more. Consult the label for complete details.

Active Ingredients:
Esfenvalerate.............. 
ETOC....................... 
Nylar...................... 
INERT INGREDIENTS..........
0.10% 
0.04% 
0.60% 
99.26%
100.00%
Size: 5 0z (34-3570CB) treats 5,000 cubic feet.
EPA Reg. No. 9444-168

CB Total Release PCO Foggers are equipped with a special valve/actuator combination that creates a unique swirling dispersal which delivers maximum reach and penetration for total area coverage. The special valve actuator produces the ideal particle size and the most efficient dispersal of the insecticide.

The valve actuator also features a positive locking mechanism which allows complete evacuation of the product every time. That means an efficient, effective insecticide that controls both pests and costs.

Use CB Total Release PCO Foggers with confidence knowing they are the highest quality foggers available.
 
 


  MATERIAL SAFETY DATA SHEET

DATA SHEET #   343570CB
  PRODUCT NAME:  CB TOTAL RELEASE PCO FOGGER WITH NYLAR AND ETOC
  EPA REG. #  9444-168
  SECTION I -- GENERAL INFORMATION
  MANUFACTURED BY:  WATERBURY COMPANIES, INC.
                    COMMERCIAL PRODUCTS DIVISION
                    P.O. BOX 640
                    INDEPENDENCE, LA  70443
  PRODUCT & SALES INFORMATION:  (203) 597-1812
  MSDS INFORMATION:  (504) 878-6751
  DATE REVISED:  08/26/96       DATE PRINTED:  03/20/97
  PREPARED BY:  J.C.A

  HAZARD RATING:  (Assumes the highest National Fire Protection
                   Associations 704 rating for individual components
                   within each hazard category)
     HAZARD RATING SCALE:  0 = MINIMAL  1 = SLIGHT   2 = MODERATE
                           3 = SERIOUS  4 = SEVERE
     HEALTH: - 1 -   FIRE: - 4 -   REACTIVITY: - 0 -   SPECIAL: - NONE -

  SHIPPING INFORMATION - PER US DEPARTMENT OF TRANSPORTATION (DOT)
  REGULATIONS:
  DOT STATUS: Regulated only when offered for transportation or transported
  by aircraft.

  PROPER SHIPPING NAME (OR DESCRIPTION IF NOT REGULATED BY DOT):  When
  transported by ground or vessel, this product is exempt from shipping
  paper requirements of US DOT-Use "Insecticides, Agricultural, N.O.S." as
  the shipping description. When transported by aircraft, proper shipping
  name is "Consumer Commodity."

  HAZARD CLASS: ORM-D

  ID#:  None

  PACKING GROUP:  N/A

  LABEL REQUIRED:  None

  NATIONAL MOTOR FREIGHT CLASSIFICATION # AND LTL CLASS:  102120-Class 60
  EXPORT SHIPMENTS: Contact manufacturer for International shipping
  information.

SECTION II -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous components greater than 1.0% (0.1% for carcinogens or suspected
carcinogens).

    +Esfenvalerate ((S)-cyano(3-phenoxphenyl)
      methyl-(S)-4-chloro-alpha-(1-methylethyl)
      benzeneacetate)
    CAS #  66230-04-4        0.100% BY WEIGHT
        OSHA PEL: N.E
          ACGIH TLV: N.E.
        OTHER LIMITS: N.E.

    +Nylar (2-1[methyl-2-(4-phenoxyphenoxyl)
      ethoxy]pyridine)
    CAS #  95737-68-1        0.600% BY WEIGHT
        OSHA PEL: N.E.
          ACGIH TLV: N.E.
        OTHER LIMITS: N.E.

    +ETOC ((RS)-2-methyl-4-oxo-3-(2-
      propynyl)cyclopent-2-enyl-(1RS)-cis,
      trans-chrysanthemate)
    CAS #  23031-36-9        0.040% BY WEIGHT
        OSHA PEL: N.E.
          ACGIH TLV: N.E.
        OTHER LIMITS: N.E.

    Propane
    CAS #     74-98-6       15-25% BY WEIGHT
        OSHA PEL: 1000 ppm
          ACGIH TLV: N.E.
        OTHER LIMITS: 1000 ppm TWA

    n-Butane
    CAS #    106-97-8       15-25% BY WEIGHT
        OSHA PEL: N.E.
          ACGIH TLV: 800 ppm
        OTHER LIMITS: 800 ppm TWA

    Nonhazardous components
    CAS: N/A                 55-65% BY WEIGHT
        OSHA PEL: N/A
        ACGIH TLV: N/A
        OTHER LIMITS: N/A

    + This item is NOT considered a carcinogen, and is listed only to aid in
    the identification of all active ingredients in the product.  Actual
    percentages are listed vs. ranges for all active ingredients.

SECTION III - SECTION 313 SUPPLIER NOTIFICATION
  This product contains no toxic chemicals which are subject to the
  reporting requirements of Section 313 of the Emergency Planning and
  Community Right-to-Know Act of 1986 and 40 CFR 372.
  CAS#  N/A               COMPONENT: PERCENT BY WEIGHT:  N/A

  This information must be included in all MSDS's that are copied and
  distributed for this material.

SECTION IV - PHYSICAL/CHEMICAL CHARACTERISTICS
  BOILING POINT: N/A
  SPECIFIC GRAVITY (H2O = 1): 0.98
  VAPOR PRESSURE (mm Hg): 3,620
  MELTING POINT: N/A
  VAPOR DENSITY (AIR = 1): N/A
  EVAPORATION RATE (BUTYL ACETATE = 1): N/A
  SOLUBILITY IN WATER: Soluble
  APPEARANCE AND ODOR: Mist with faint odor

SECTION V - FIRE AND EXPLOSION HAZARD DATA
  FLASH POINT (METHOD USED): Not Applicable.

  FLAMMABLE LIMITS: N/A
          LEL: N/A
          UEL: N/A

  EXTINGUISHING MEDIA: CO2, Dry Chemical, Foam.

    SPECIAL FIRE FIGHTING PROCEDURES: Self contained air supply suggested.
    Keep containers cool to avoid bursting.

    UNUSUAL FIRE AND EXPLOSION HAZARDS:  Exposure to temperatures above 130
    deg.F may cause bursting.

SECTION VI - REACTIVITY DATA
  STABILITY:    UNSTABLE:  ---    STABLE:  -YES-

  CONDITIONS TO AVOID: Open flames and very hot surfaces can cause thermal
  decomposition.

  INCOMPATIBILITY (MATERIALS TO AVOID): Strong alkalines and acids.

  HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Carbon dioxide and carbon
  monoxide.

  HAZARDOUS POLYMERIZATION:  MAY OCCUR:  ---      WILL NOT OCCUR:  -X-

  CONDITIONS TO AVOID: None known.

SECTION VII - HEALTH HAZARD
  ROUTE(S) OF ENTRY:  INHALATION?  -YES-    SKIN?  -YES-
  INGESTION?  -YES-

  HEALTH HAZARDS (ACUTE AND CHRONIC): Light exposures may cause light
  burning or transient tingling sensations on more sensitive areas of the
  skin, dermatitis.

  CARCINOGENICITY:
          NTP?  -NO-
          IARC MONOGRAPHS?  -NO-
          OSHA REGULATED?  -NO-

  SIGNS AND SYMPTOMS OF EXPOSURE: Skin disorders, eye irritaion, nasal and
  respiratory irritation, nausea, cramps, and vomiting.

  MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known.

  EMERGENCY AND FIRST AID PROCEDURES: IF SWALLOWED: Call a physician or
  Poison Control Center immediately. IF IN EYES: Flush with plenty of
  water. Get medical attention if irritation persists. IF ON SKIN OR
  CLOTHING: Remove contaminated clothing and wash before reuse. Wash skin
  with soap and warm water. Get medical attention if irritation persists.
  IF INHALED: Remove victim to fresh air if effects occur, and call a
  physician.

SECTION VIII - PRECAUTIONS FOR SAFE HANDLING AND USE
  STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: If container is
  ruptured or begins to leak, place in a well-ventilated area free of sparks
  and ignition sources. Pesticide that cannot be used according to label
  instructions must be disposed of according to all applicable Local, State
  and Federal procedures.

  WASTE DISPOSAL METHOD: Do not reuse empty container. This container may be
  recycled in the few but growing number of communities where (steel)
  aerosol can recycling is available. Before offering for recycling, empty
  the can by using the product according to the label. (DO NOT PUNCTURE!) If
  recycling is not available, wrap the container and discard in the trash.
  Any remaining or collected liquid from punctured cans should be disposed
  of in a safe manner at an approved facility in accordance with Local,
  State, and Federal regulations.

  PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in a cool, dry area
  away from heat or open flame. Exposure to temperatures above 130 deg.F.
  may cause bursting. Shake well before use. Keep container upright. Use one
  5oz container per 5,000 cubic feet. Use additional units for remote rooms
  or where free flow of mist is not assured. Place can on table or stand in
  the center of the room. Place several layers of newspaper under can to
  prevent marring of surface. Foods should be removed or covered during
  treatment.  Cover all food processing surfaces. Remove pets, birds, and
  cover fish aquariums before spraying.

  OTHER PRECAUTIONS: It is a violation of federal law to use this product in
  a manner inconsistent with its labeling. Read label. Close doors and
  windows. Open cabinets and closets. Shut off fans and air conditioners.
  Put out all flames and pilot lights. Leave building after actuating can
  and leave undisturbed for at least two hours. Ventilate thirty minutes
  before reentering. Repeat spraying in 2 weeks or when necessary.

  This product is authorized for use in plants operating under USDA
  Inspection and Grading Programs as a CATEGORY F2 substance.

  AEROSOL STORAGE CLASSIFICATION: Store as a level 1 aerosol (per NFPA 30B).

SECTION IX - CONTROL MEASURES
  RESPIRATORY PROTECTION (SPECIFY TYPE): Not required - avoid breathing
  mist.
    VENTILATION:
        LOCAL EXHAUST: Shut off fans and air conditioners during treatment.
        Close doors and windows.
        MECHANICAL (GENERAL): Ventilate treated areas according to label
        before reoccupying.
        SPECIAL: N/A
        OTHER: N/A

    PROTECTIVE GLOVES: Not required - avoid contact with skin.

    EYE PROTECTION:
 

    WORK/HYGIENIC PRACTICES:

SECTION X - TITLE III SECTION 312 TIER TWO INVENTORY REPORT INFORMATION
  When Completing Title III Section 312 Tier Two Inventory Reports, the
  following information should be used.  See local regulations for
  additional and complete reporting requirements for the specific site.
  CAS #: N/A - There is no CAS# for this mixture.
  This product should be described as:
        PURE
        MIXTURE  X
        SOLID
        LIQUID  X
        GAS  X
    PHYSICAL & HEALTH HAZARDS:
        FIRE  X
        SUDDEN RELEASE OF PRESSURE  X
        REACTIVITY
        IMMEDIATE  X
        DELAYED
SECTION XI - SUMMARY OF CHANGES
  Added USDA authorization information in Section VIII.

SECTION XII - ADDITIONAL INFORMATION
      For additional safety information questions contact the Waterbury
      Companies, Inc. MSDS coordinator at (504) 878-6751.

  This information is supplied in good faith, but no warranty expressed or
  implied is made.  Waterbury Companies believes that it is accurate to the
  best of its knowledge & relates only to the specific material designated
  herein
  
 
 

Return to BCG main page